Car owners are looking for a method to repair gouge in plastic bumper that is foolproof and easy to follow. There are not many sources that offer such instruction. Truthfully such damage is not considered a major damage. Nonetheless, it certainly affects the aesthetics of your car. Sending your car to repair shop for such minor repairmen does not only going to cost you, but also prevents you from driving your car around for several days. Thus, you should learn how to repair plastic car bumper on your own to save time and money. What can you do and prepare in order to make your bumper looking sleek again?
There are several things that you will need to purchase. You need to buy official paint of your car’s color in spray can. It is available in authorized retailer and dealer. Official released paint will ensure high quality finished at the end. You also need to purchase primer and clear coat. Wax and grease cleaner are needed in order to clean your car before paint application. Way before that, you will need putty to fill in the gouges on your bumper. Other important things that you should have ready on hand would be clean damp towel and sandpaper (both coarse and fine).
So, what do you do when you repair gouge in plastic bumper? The first thing that you need to do is covering the area that you do not want to be sprayed by the paint. You can then smooth out the scratches on your bumper by sanding it right on the damage. Once you have done that, you can finally clean the sanded area with clean towel first to remove the debris. After that, you can apply wax or grease cleaner. There are some dimples that might not get sanded. In this case, you can fill it with putty and ensure that the application is as smooth as possible.
Scuffing is then done to make sure that the putty will stay intact. You may need to extent the scuff up to 10 inches around the damaged area. Once you have done that, you can let it dry out first before applying primer. It will make the paint adhere better to the surface of your car. Once the primer has been dried, you can then start painting your bumper. Clear coat is then applied over the dried paint to make sure that the paint would be safe from damage and retain its gloss. Those are the steps to repair gouge in plastic bumper.
